Installing interior LED lights in your car can be a fun and relatively straightforward project. Here’s a general guide on how to hardwire LED lights in any car:
Gather Materials: You’ll need LED light strips, wire, a fuse tap or add-a-circuit kit, wire connectors, electrical tape, a switch (if desired), and basic tools like wire cutters, strippers, and crimpers.
Plan Placement: Decide where you want to install the LED strips in your car’s interior. Common locations include under the dashboard, along the footwells, or under the seats. Make sure to choose spots that won’t interfere with the car’s operation or safety features. For more information please visit Store365
Prepare the LED Strips: Measure and cut the LED light strips to the desired length for each location in your car. Most LED strips can be cut to size at designated cut points.
Prepare the Wires: Cut lengths of wire to connect the LED strips to your car’s electrical system. Make sure the wire is long enough to reach from each LED strip to the power source.
Access the Power Source: Locate a suitable power source in your car’s fuse box. This could be a fuse that’s only powered when the ignition is on or one that’s always on, depending on your preference. Use a fuse tap or add-a-circuit kit to safely tap into the power source without damaging your car’s electrical system.
Connect the Wires: Connect one end of the wire from each LED strip to the positive (+) terminal of the LED strip and the other end to the positive terminal of the power source. Repeat this process for the negative (-) terminals. Use wire connectors and crimp them securely to ensure good connections.
Add a Switch (Optional): If you want to be able to turn the LED lights on and off manually, install a switch in-line with the positive wire. Mount the switch in a convenient location, such as on the dashboard or center console.
Test the Lights: Before securing everything in place, test the LED lights to ensure they’re working properly. Turn on your car’s ignition and flip the switch (if installed) to see if the lights turn on.
Secure the LED Strips: Once you’ve confirmed everything is working, use adhesive backing or mounting brackets to secure the LED light strips in place.
Tidy Up the Wiring: Bundle up any excess wire and secure it out of the way using zip ties or adhesive clips. Make sure no wires are dangling or in danger of getting caught on moving parts.
Reassemble: Put back any panels or trim pieces you removed to access the wiring.
Enjoy Your New Lights: With everything installed and secured, enjoy the ambiance of your newly lit car interior!
Always consult your car’s manual or a professional if you’re unsure about any steps or if you have any concerns about working with your car’s electrical system. Safety should always be a top priority when working on your vehicle.
